Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
myphone myA9 firmware inside
#1
myphone myA9 firmware cm2 back up tested by me

Created by Infinity-Box © Chinese Miracle II © 2016
Device Brand   : MyPhone
Device Model   : myA9_DTV
Device CPU     : MT6580
Device IntName : myA9_DTV
Device Version : 7.0
Device Compile : 11/1/2017 2:44:14 AM
Device Project : alps-mp-n0.mp2-V1_esky6580.we.n_P22
Device ExtInfo : myA9 DTV




MyA9 MT6580 7.0

Pass-https://gsmunited.com.ph/index.ph
GSMnewtech 
Do Not Post Thank Posts - Use Thanks Button
[-] The following 1 user says Thank You to GSMnewtech for this post:
  • GSMKing
Reply
#2
tested back up napakinabangan ko na nman 

hang logo HR.cm2 format no lock flash!

[Image: download-2.png]

[Image: download.png]

Code:
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E20103237313694B3
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20103237313694B3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID    : 0x3CE96C885492E56C9A082785E748444E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : esky6580_we_n , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3954 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000001C6EE0000
Flash Pre-Erase Done, time used : 00:00:04

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_esky6580_we_n.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:07:13

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:01:22

Update Mirror PMT
Update Done!

Update RomInfo done

Done!


done!

[Image: download-1.png]
GSMnewtech 
Do Not Post Thank Posts - Use Thanks Button
[-] The following 1 user says Thank You to GSMnewtech for this post:
  • clarince1
Reply
#3
tested master jhun
Kung may PASSWORD 'wag kalimutan isama sa POST!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)